How to Calibrate Your Steel Tying Machine for Perfect Ties​

Our Kowy branded tying machine has chromed finishing and is a professional grade outfitted equipment that will allow you to get the perfect tie every time. But if we want reliability and accuracy, it’s crucial to properly calibrate your machine. Calibration is the way to set up your machine so that it works well for you and gets all of its kinks worked outIn this post, we will give you some tips in order to calibrate your Kowy auto rebar tying machine so everything ties out. 

How to Adjust Your Steel Tying Machine for Uniform Ties? 

Setting up your steel tying tool can be a little overwhelming, but with the correct instructions, it is easy and quick. Here are a couple of suggestions to help you form a more consistent ties with machine: 

Read It: The first step that you should take is to read the user manual, this will guide you through your calibration process. The manual will walk you through the process so that you can calibrate your tool properly. 

Test the Tension: An important aspect of getting great ties is having the proper tension set in your steel tying equipment. You should also check out the tension settings and make any necessary changes to them if you want good results. 

Maintenence: Keep your machine running smooth for years, by using our easy to clean binder. Be sure to clean all debris and any dirt that may have built up in the machine, before doing so. 

Test Drives: Now give your machine a few test drives to ensure that all is well. This helps to let you know if anything is wrong and lets you fix it before you start working. 

Simple Way to Get Perfect Tension On Your Steel Tie-Machine

And getting the right tension on your steel tying machine is key to making sure those ties are strong and won't come loose. Here we have some easy steps to get the perfect tension on your machine: 

Set Tension Settings First, adjust the tension settings of your machine based upon the fabric you are using. Tension can be based on material composition, so adjust as needed. 

Test the Ties: When you have set the tension, test your ties on a scrap of fabric to check if the tension is right. If your ties are too loose or too tight just adjust the tension settings and you'll be good to go. 

Fine Tuning Your Settings: Once you've tested out the ties, you'll want to fine-tune your tension settings to make sure they're spot on. They may need a little adjusting and you might have to experiment, but practice makes perfect and with some patience you will get your tension the way you want it on machine. 

Factors to Bear in Mind When Calibrating Your Steel Tying Machine

There are a few important things to consider when you set up your steel tying machine so that it’s calibrated correctly. These factors include: 

Material Case: Various material may need different cutter setting. Be sure to set the proper settings based on the material you are cutting to achieve great results! 

Machine Care: Machine maintenance is very important to keep your machine running seamlessly. Clean and oil your machine at least twice a year to avoid any problems. 

Tension Settings: I told you already, your machine’s tension settings is a big factor in getting the ties perfect. Be sure to change the tension settings for whatever material you may be sewing with. 

Training: The way you use your steel tying machine can affect program outputs. Ensure that you and your team are fully trained in operation of the Kowy automatic rebar tying machine, attaining good calibration. 

How to Calibrate Your Steel Tying Machine for Accuracy and Precision? 

It is imperative that you calibrate your steel tying machine so that it will measure with precision and accuracy. Here’s what to consider to make machine calibration accurate and precise: 

Proper Tools and Equipment: Ensure the right tools and equipment are used to calibrate your machine. Misusing the tools can result in imprecise readings and harm your machine. 

Always Read and Follow the Instructions: Never forget to read the instruction manual of your machine when calibrating it. If any step is skipped or do not follow instructions as specified may result in mis-calibration. 

Get Professional Help: If you are unsure about setting up your machine it's always best to get professional assistance. Contact the manufacturer or a service technician who is factory trained to assist you with calibrating your machine properly. 

Routine Measurement: Keep a record of how your machine "reads." Adjust as required to keep your knots precise and accurate. 

Tips for Achieving the Best Performance on Your Steel Tying Machine Calibration

For best results, follow these guidelines for keeping your shape-tying machine calibration operating at its peak. 

Routine Maintenance: Clean and oil or grease (according to manufacturer instructions) regularly to avoid any snags with operation. 

Calibration Check: Check the calibration of your drill regularly to make sure it's not deteriorating. String Front D will stretch just like that!!  Tweak accordingly to get even and tight ties. 

Training: Ensure to train yourself and your team how to correctly calibrate the machine. It will allow you to eliminate any mistakes and have an accurate tie. 

Spare Parts: Replace any broken or faulty components on your machine to prevent incurring damages. Your machine’s performance may be impacted if you use old or broken parts. 

If you follow these guidelines and best practices, you’ll be able to properly calibrate your steel tying machine so you can get perfect ties without fail. Calibration isn’t something you can overlook if you want your machine to keep performing at its best, so invest time into getting it spot on. With the proper methods and tutoring, you can strategically set your Kowy rebar tying machine like the pros and make high quality ties for your construction jobs.